Shower Head Supplier for Spain

Fitment and thread standards in Spain

Spain is a G1/2 market. The mixer outlet, the flexo and the teleducha all use the same parallel thread, so a ZHONGHE hand shower fits a Spanish hose and a Spanish hose fits a Spanish grifería with no adapter. Hoses are commonly 1/2 inch at both ends with a cone seal and a washer; the seat shape and washer material belong in the RFQ, because a flexo that seals on the wrong face weeps at the mixer even with the correct thread. The same fitment covers Portugal and most of Latin America, so an importer running an Iberian and a Latin American range can share one head specification.

The second number is the barra de ducha. Spanish slider sets are commonly built on a 25 mm rail, and a soporte sized for a thinner bar will not clamp it, so the rail diameter is specified next to the thread. A columna de ducha adds a fixed rociador and a diverter, and there the arm length, the wall spacing and the panel size all need stating. Where an older or imported fitting appears, the S (M22.1 x 1.5), G (M21.3 x 1.5), K (M21.5 x 2) and M (M22.1 x 1.75) adapter set covers the head side.

Regulations, certifications and import documents

Spain does not run a single mandatory approval mark for a plain mechanical shower head in the way France runs ACS. The common route is the AENOR mark against UNE-EN 1112 for shower outlets and UNE-EN 1113 for hoses, which distributors and public tenders often request, while marketplace and DIY channels usually do not. The Código Técnico de la Edificación governs the installation side rather than the product itself, and drinking-water quality rules apply to the supply. Substance rules apply in parallel: REACH and its SVHC candidate list and RoHS, with the factory's metasilicate media checked against REACH SVHC and its calcium sulfite balls RoHS screened. Testing is arranged per project with third-party labs rather than claimed in advance, and certified options are available on request.

On the administrative side, packaging placed on the Spanish market commonly requires registration under the extended producer responsibility scheme, and that duty sits with the party placing the goods on the market rather than with the factory. Spanish-language instructions on the box are expected in every retail channel. CE marking becomes relevant only when an electrical function such as an LED module is added. A plain mechanical shower head normally moves as ordinary goods at customs; confirm the commodity code, the duty and the import VAT treatment with your customs broker before the proforma is signed.

What sells in Spain: water conditions, channels and product fit

Two conditions shape the Spanish range. The first is hardness: the Mediterranean coast, the Levante and the Madrid area draw very hard water, so cal is a word every listing uses and antical silicone nozzle faces that can be rubbed clean sell on a photograph. Filter teleduchas with a replaceable cartridge and inline filter housings follow the same argument, with mineral bead, PP cotton, activated carbon and mixed media formats available. The factory makes no health, skin or hair claim for any of them. The second condition is scarcity: drought restrictions have become a recurring event, which turns ahorro de agua from a nice-to-have into a headline claim and makes high pressure micro-nozzle heads useful, because they keep the spray firm at a lower litres per minute figure.

The channel decides the packaging. Amazon.es rewards a photographed set, a clear litres per minute figure and Spanish instructions; AliExpress España carries a long price-led tail. Leroy Merlin, Bricomart, Bricodepot and the ferretería network want retail-ready cartons, EAN structure and a Spanish manual, while grifería wholesalers care about the fitting standard, the finish and repeat availability of the same reference. Price tiers run from a plain chrome ABS teleducha at the opening point through multi-function and filter models to conjuntos and columnas. Custom packaging can be discussed from about 2,000 units, which is where MOQ commonly starts.

Logistics, terms and how to start

Spanish programs commonly route through Valencia or Barcelona, approximately 24 to 32 days by sea from Ningbo-Zhoushan, with Algeciras used for transhipment and Bilbao for the north. FOB Ningbo is the term most often quoted for a first order because it leaves the buyer's forwarder in control of the ocean leg, while EXW, CIF and DDP are quoted on request. Payment norms in this trade typically involve a deposit with the balance against a shipping document, agreed per buyer. Confirm the commodity code, duty and import VAT treatment with your customs broker.

To start, send the product type, the thread and seal, the barra de ducha diameter, the flexo length, the target flow at a stated pressure, the finish, the Spanish artwork and the quantity. ZHONGHE quotes against existing molds where one fits, sends samples, and moves to production once the sample and the artwork are approved. Guide timing is about 30 days of production on existing molds, plus about 15 days for a new appearance design, about 15 days for internal structure design and about 60 days for a new mold. Every finished unit is water tested before packing, with leakage checks at 0.5MPa in selected processes. RFQs can be sent in Spanish.