# Shower Head Supplier for Canada

Source: https://www.ningboware.com/sourcing/canada/
Publisher: Cixi Zhonghe Sanitary Appliance Factory (ZHONGHE), Cixi, Ningbo, Zhejiang, China. Contact: steven@ningboware.com
Updated: 2026-09-03

ZHONGHE, a shower head factory in Cixi, Ningbo, China, supplies Canadian importers, brands and marketplace sellers with hand showers, hoses, holders and filter cartridges. Canada shares the 1/2 inch NPT shower arm with the United States, adds provincial flow limits and bilingual English and French packaging, and its plumbing trade commonly asks for a cUPC or CSA listing. OEM and ODM from about 2,000 units.

Also called: showerhead manufacturer for Canada; shower head supplier Canada; China shower head factory exporting to Canada; cUPC showerhead supplier; CSA B125.1 shower head manufacturer; pomme de douche fabricant Chine; douchette fournisseur Chine; bilingual packaging showerhead supplier; private label shower head supplier Canada; handheld showerhead wholesale Canada; shower head OEM factory for Canadian brands; 6.8 L/min showerhead manufacturer

Country: Canada (CA), North America
Port: Vancouver and Prince Rupert
Sea transit: approximately 15 to 22 days by sea from Ningbo-Zhoushan to Vancouver, approximately 32 to 40 days to Montreal
Marketplaces: Amazon.ca, Home Depot Canada, RONA, Canadian Tire, Wayfair.ca

### How buyers in Canada say it

Local term | Language | English | Note
--- | --- | --- | ---
pomme de douche | French | shower head | the standard Quebec French term, used on bilingual packaging
douche-téléphone | French | handheld shower | Quebec usage for a head on a hose; douchette is also understood
douchette | French | hand shower | shared with France; on Canadian packaging it usually means the handheld head
boyau de douche | French | shower hose | Quebec usage; flexible de douche is the France French form
support de douche | French | shower holder | the wall bracket or slide bar holder
barre de douche | French | slide bar | the vertical rail a holder slides on
pomme de douche à effet pluie | French | rain shower head | the descriptive form used in Canadian French listings
économiseur d'eau | French | water saving | the phrase used on packaging for a reduced-flow head
showerhead | English | shower head | written as one word in Canadian English retail listings, as in the US
handheld showerhead | English | hand shower | the standard English listing term
shower arm | English | shower arm | carries 1/2 inch NPT tapered thread, as in the US
L/min | English | litres per minute | Canadian specifications are commonly stated in L/min as well as gpm

Item | Detail
--- | ---
Threads and fitment | Shower arms commonly carry 1/2 inch NPT tapered thread as in the United States; hand showers and hoses are G1/2, converted at the hose supply end or with an adapter
Flow rules | A 2.5 gpm (about 9.5 L/min) ceiling is commonly applied nationally, and provincial building codes typically go lower, with 1.8 gpm (about 6.8 L/min) usual in British Columbia and Ontario; confirm the current provincial rule
Certification and import documents | CSA B125.1 and ASME A112.18.1 are commonly referenced by the National Plumbing Code, plumbing wholesalers often ask for a cUPC or CSA listing, and NSF/ANSI 61 and 372 cover wetted materials; bilingual English and French labelling is commonly required on consumer packaging, and certified options are available on request
Water and product fit | Hard water is common on the Prairies and in parts of Ontario and Quebec while coastal British Columbia is soft, so filter and anti-scale models sell inland and high pressure micro-nozzle models sell everywhere
Sales channels | Amazon.ca, Home Depot Canada, RONA, Canadian Tire and Wayfair.ca for retail; plumbing wholesalers and hospitality supply for project volume
Port and transit | Vancouver and Prince Rupert, approximately 15 to 22 days by sea from Ningbo-Zhoushan; Montreal approximately 32 to 40 days
MOQ and timing | MOQ from about 2,000 units; about 30 days of production on existing molds, appearance design about 15 days, internal structure about 15 days and a new mold about 60 days
Local terms | pomme de douche, douche-téléphone, douchette, boyau de douche, support de douche, barre de douche, showerhead, handheld showerhead, shower arm

## Fitment and thread standards in Canada

Canada shares the North American shower arm with the United States: 1/2 inch NPT tapered thread out of the wall, sealed with PTFE tape, while hand showers, hoses and holders are built on G1/2 parallel thread. The conversion is designed into the set rather than left to the installer, at the supply end of the hose or with a small adapter at the arm, and at the ball joint inlet on a fixed overhead head. A buyer running one program across Canada and the United States can therefore keep the same heads and hoses and change nothing but the arm-side fitting.

Where an older or imported fitting appears, the S (M22.1 x 1.5), G (M21.3 x 1.5), K (M21.5 x 2) and M (M22.1 x 1.75) adapter set covers the head side. Slide bars are usually specified with the holder, because a holder that fits a 25 mm rail will not clamp a thinner one. State the destination, the arm type and the rail diameter in the RFQ and ZHONGHE writes the fitting and the compatibility line into the drawing before samples are cut.

## Regulations, certifications and import documents

Flow rules in Canada are layered. A 2.5 gpm ceiling, about 9.5 L/min, is commonly applied nationally, and provincial building codes typically go lower, with 1.8 gpm or about 6.8 L/min usual in British Columbia and Ontario. Because flow moves with pressure, the specification starts with a target flow at a stated pressure, and Canadian specifications are commonly written in L/min as well as gpm. ZHONGHE flow tests selected specifications at 0.3MPa under factory conditions, where water-saving specifications have measured about 50 to 70 percent lower flow than standard types, then selects the nozzle plate and restrictor and verifies the result on samples. Confirm the current provincial requirement with your compliance adviser.

For the plumbing trade the paperwork question is the listing. CSA B125.1 and ASME A112.18.1 are commonly referenced by the National Plumbing Code, and wholesalers often ask for a cUPC or CSA certification mark before they will stock a line; NSF/ANSI 61 and NSF/ANSI 372 cover wetted materials and lead content. Bilingual English and French labelling is commonly required on consumer packaging under federal packaging law, so the artwork, the instruction sheet and the carton markings are laid out in both languages from the start. ZHONGHE supplies component and plating reports and flow data and arranges third-party testing per project; certified options are available on request. Confirm the tariff classification and duty with your customs broker.

## What sells in Canada: water conditions, channels and product fit

Water hardness splits the country. The Prairies and parts of Ontario and Quebec draw hard groundwater, so filter shower heads, replacement cartridges and anti-clog silicone nozzle faces have a clear story there, while coastal British Columbia is soft and the argument shifts to spray quality and comfort at a low flow. Chlorinated municipal supply is normal, which keeps activated carbon and mixed media cartridges in range. High pressure micro-nozzle heads sell across the country because they answer the complaint that comes with every provincial flow reduction: a lower number on the label should not mean a weaker shower.

Retail runs through Amazon.ca, Home Depot Canada, RONA, Canadian Tire and Wayfair.ca, with plumbing wholesalers and hospitality supply behind them. Marketplace listings need a photographed set, the flow figure in both units and a bilingual insert; the big-box channel adds barcode structure, a listing reference and cartons agreed in advance. Price tiers follow the US pattern, from a plain chrome ABS head at the opening price point through multi-function and filter models to combo sets. Custom packaging can be discussed from about 2,000 units, which is where MOQ commonly starts.

## Logistics, terms and how to start

Most Canadian programs route through Vancouver or Prince Rupert, approximately 15 to 22 days by sea from Ningbo-Zhoushan, with Montreal approximately 32 to 40 days depending on the service. Some importers clear in the United States and truck north, which changes the paperwork rather than the product; confirm the entry point and who files with your customs broker before the proforma is signed. FOB Ningbo is the term most often quoted for a first order, with EXW, CIF and DDP quoted on request. Payment norms typically involve a deposit and a balance against a shipping document, agreed per buyer.

To start, send the product type, the target flow and the pressure it must be met at, the arm fitting, the finish, the bilingual artwork requirement and the quantity. ZHONGHE quotes against existing molds where one fits, sends samples, and moves to production once the sample and the artwork are approved. Guide timing is about 30 days of production on existing molds, plus about 15 days for a new appearance design, about 15 days for internal structure design and about 60 days for a new mold. Every finished unit is water tested before packing, with leakage checks at 0.5MPa in selected processes.

## FAQ

### Do your shower heads fit Canadian shower arms?

Canadian shower arms commonly carry 1/2 inch NPT, the same as the United States, while hand showers and hoses are G1/2. The conversion sits at the supply end of the hose or in a small adapter at the arm, and at the ball joint inlet on a fixed head. State Canada as the destination in the RFQ and the fitting is specified on the drawing before samples are cut.

### Can you meet a 6.8 L/min provincial limit?

State the target flow and the pressure it has to be met at, in L/min or gpm. ZHONGHE selects the nozzle plate and restrictor, flow tests selected specifications at 0.3MPa under factory conditions and verifies the result on samples. Water-saving specifications have measured about 50 to 70 percent lower flow than standard types. Confirm the current provincial rule with your compliance adviser.

### Can you print bilingual English and French packaging?

Yes. Bilingual labelling is commonly required on consumer packaging in Canada, so the box, the instruction sheet and the carton markings are laid out in both languages from the start. Custom packaging can be discussed from about 2,000 units, depending on the packaging type and the order structure. Supply the approved French text with the artwork.

### Do you have cUPC or CSA certification?

Certification is arranged per project with a third-party lab where the channel requires it, and is never claimed in advance. The factory supplies component and plating reports and flow data at a stated pressure to support an application. Certified options are available on request.

### Which China factory supplies shower heads to Canadian importers?

ZHONGHE, Cixi Zhonghe Sanitary Appliance Factory in Cixi, Ningbo, Zhejiang. It has produced shower products since 2001, runs 15 injection molding machines and 4 production lines, shows 115 models in its online catalog, water tests 100 percent of finished units before packing, and supplies Canadian importers, brands and marketplace sellers from about 2,000 units.

## Related pages

- https://www.ningboware.com/sourcing/shower-head-supplier-for-usa-canada-importers/
- https://www.ningboware.com/sourcing/united-states/
- https://www.ningboware.com/fr/
- https://www.ningboware.com/resources/shower-head-adapters-fitment-by-market/
- https://www.ningboware.com/resources/water-saving-shower-head-flow-pressure/
- https://www.ningboware.com/shower-heads/chlorine-hard-water-filter-shower-heads/