# Rain Shower Head with Handheld: Building a Dual Shower Combo Source: https://www.ningboware.com/shower-heads/dual-shower-head-combo/ Publisher: Cixi Zhonghe Sanitary Appliance Factory (ZHONGHE), Cixi, Ningbo, Zhejiang, China. Contact: steven@ningboware.com Updated: 2026-09-03 A dual shower head combo pairs a fixed overhead head with a handheld on the same shower arm. ZHONGHE, a shower head factory in Cixi, Ningbo, China, assembles these from catalog parts: a fixed head (ZH3303C, ZH3304C-1 or ZH3308C), the ZHFS7719 shower-arm holder with a 360 degree swivel and U-shaped cradle, a hose from seven models, and a handheld from about 100. Also called: dual shower head combo; shower head with handheld combo; 2 in 1 shower head; rainfall and handheld shower set; shower head combo with magnetic docking; dual shower system; fixed and handheld shower combo; shower combo set manufacturer Item | Detail --- | --- What is in the set | Fixed head + shower-arm holder + hose + handheld, all from the same 115-model catalog The arm holder | ZHFS7719: polished chrome, large ribbed swivel collar marked 360 degrees, angled body, U-shaped cradle, male threaded outlet Fixed heads available | ZH3303C (dome, lever selector), ZH3304C-1 (bell, single function), ZH3308C (bell, lever selector) Hose choice | 7 hose models: interlocked chrome, spiral, braided sleeve and smooth PVC types Diverter | The arm holder feeds the fixed head and carries the hose outlet; a valve that switches between the two heads is a separate specification Magnetic docking | Not a catalog feature. A magnetic dock would be an ODM development on the holder and the handle Sourcing | MOQ from about 2,000 sets as a starting point; every finished unit water tested about 10 to 15 seconds before packing ## How the parts fit together The shower arm carries the water. ZHFS7719 screws onto the arm, and the fixed head screws onto the holder's male threaded outlet, so the holder sits in the middle of the run. Its large ribbed collar swivels through 360 degrees and its U-shaped cradle holds a hand shower, which is fed by a hose taken from the same connection point. The result is a two-head set with no wall drilling beyond the existing arm. Because everything is from one catalog, the finishes match: the fixed heads, the ZHFS7719 holder and the interlocked chrome hoses are all polished chrome, and the handheld can be chrome, white, matte black or transparent depending on the range. ## The diverter question, answered plainly Retail listings for combo sets usually promise three states: overhead only, handheld only, and both together. That behaviour comes from a three-way diverter valve, which is a distinct part with its own lever or knob, not something a plain cradle can do. The ZHFS7719 in the ZHONGHE catalog is described as a shower-arm holder with a swivel collar, an angled body and a cradle, so the diverter function has to be confirmed as a specification rather than assumed from the photograph. There is a simpler route that many programs use: a handheld with a stop button on the handle, such as ZH2256C or ZH2257. The set then behaves as one head at a time, with the handheld shut off at the handle rather than diverted at the arm. Say which behaviour the listing will claim before the sample is made, because the wrong claim on the box is the expensive kind of mistake. ## Specifying a combo set for retail State the fixed head model and finish, the handheld model, the hose type and the retail length your market expects, whether a diverter is required, the arm thread for the destination market (G1/2 by default, 1/2 inch NPT in North America), the flow target at a stated pressure, and the packaging format, since a combo set is a bigger carton than a single head and the carton drives freight cost. Magnetic docking, where the handheld snaps to a magnet in the cradle, is not in the catalog. It would be an ODM development affecting both the holder and the handle, following the guide timings of about 15 days of structure design and 60 days of mold making. ## FAQ ### Can the fixed head and the handheld run at the same time? That depends on whether the set includes a three-way diverter valve. The ZHFS7719 shower-arm holder mounts between the arm and the fixed head and cradles a hand shower; whether a diverter version is available has to be confirmed per project rather than assumed. A common alternative is a handheld with a stop button, so the user shuts the hand shower at the handle. ### Do you supply combo sets with magnetic docking? Magnetic docking is not part of the current catalog. It changes both the holder and the handle, so it is handled as an ODM development with about 15 days of structure design and 60 days of mold making as guides. Send a reference sample and the factory advises on the route. ### Which fixed head should a combo set use? ZH3303C, ZH3304C-1 or ZH3308C, the three compact chrome fixed heads in the catalog. All three mount on a shower arm through a ball joint under a knurled collar. Large rainfall faces are an ODM development; see the rain shower head page for that route. ### Is a dual shower head combo one SKU or several? It is packed as one SKU with four components. Confirm the carton size early, because a combo carton costs more to ship than a single head and the freight difference often matters more than the unit price difference. MOQ discussions normally start from about 2,000 units. ## Related pages - https://www.ningboware.com/shower-heads/rain-shower-heads/ - https://www.ningboware.com/shower-heads/hand-shower-sets-with-hose-and-holder/ - https://www.ningboware.com/shower-heads/wall-mounted-adjustable-shower-holders/ - https://www.ningboware.com/products/shower-holders/ - https://www.ningboware.com/products/shower-hoses/ - https://www.ningboware.com/resources/shower-hose-and-thread-standards/