# Shower Head Injection Molding Factory: The Molding Shop in Cixi Source: https://www.ningboware.com/manufacturer/shower-head-injection-molding-factory/ Publisher: Cixi Zhonghe Sanitary Appliance Factory (ZHONGHE), Cixi, Ningbo, Zhejiang, China. Contact: steven@ningboware.com Updated: 2026-09-05 ZHONGHE injection-molds its own shower head parts at its plant in Changhe Town, Cixi, Ningbo. The molding shop runs 15 injection molding machines. Bodies, face plates and handles are molded in ABS, transparent handles and filter chambers in PC, and color comes from masterbatch rather than from a coating. The factory owns the molds behind its 96 catalog model codes, so an OEM order can reuse a live tool instead of paying for a new one. Also called: shower head injection molding manufacturer; injection molded shower head factory; ABS shower head molding factory; PC transparent shower head molding; shower head plastic parts manufacturer; shower head molding supplier China; plastic injection molding for bathroom products; shower head part molding factory Ningbo; wholesale injection molded shower heads; bulk molded shower head parts; OEM injection molded shower heads; ODM shower head molding factory; private label injection molded shower head; custom molded shower head parts; shower head molding exporter; shower head parts producer China; injection molded shower heads made in China; China shower head molding factory; Ningbo shower head molding supplier; chrome plated ABS shower head factory; transparent PC shower head supplier; masterbatch color shower head factory Item | Detail --- | --- Machines | 15 injection molding machines Body material | ABS for bodies, face plates and handles Transparent parts | PC for transparent handles, filter chambers and windows Colour | Molded-in color from masterbatch; chrome plating and painting are separate finishing routes Molds | The factory's own molds for the catalog models; a new tool takes about 60 days Part families | Face plate, water chamber, body halves, handle, cartridge housing, connection nut, switch and button parts In-process checks | Short shots, flash, sink marks, weld lines, color difference and warpage on first-off and in-process samples Order size | OEM from about 2,000 units on existing molds ## What the molding shop runs Fifteen injection molding machines produce the plastic parts of every catalog model. ABS is the standard material for bodies, face plates and handles: it takes a chrome finish well, holds detail, and keeps a hand shower light. PC is used where a part has to be transparent and stay tough, which is why filter chambers and clear handles are molded in it. Both materials absorb moisture, so they are dried before molding; wet resin shows up as streaks and weak welds in the finished part. Colour on a colored model comes from masterbatch mixed into the resin, so the color goes all the way through the part instead of sitting on top of it. That is why the kids, pet and transparent models keep their color when a coating would have chipped. Chrome plating and painting are handled as finishing routes after molding and are covered on the finishing page. ## The part families inside one hand shower A hand shower looks like one object and is usually seven or more molded parts: the face plate that carries the nozzles, the water chamber behind it, two body or handle halves, a cartridge housing on filter models, the connection nut at the hose end, and the button, selector or switch parts on multi-function and stop-button models. Each one asks something different from the tool. The face plate needs consistent nozzle geometry, because that is what a buyer feels as spray quality. The chamber needs a clean weld where it seals. The handle needs a wall thickness that does not sink where the wall meets a rib. Soft nozzle tips on the anti-clog models are a separate soft-material part rather than a feature of the ABS molding, and the material is confirmed per model. Filter media, O-rings and hoses are components rather than molded parts, and they are checked on their own route before assembly. ## Cycle time, tolerances, and the defects that matter Cycle time on a shower head part is driven mostly by wall thickness and cooling, not by the size of the machine. A thick handle half cools slowly and sets the pace of the tool; a thin face plate runs faster but shows flow marks sooner. That is why a design review before tooling is worth more than a discount later: a wall thickness fixed on a drawing costs nothing, and the same change after the mold is cut costs a tool modification. Dimensional tolerances are confirmed per part and per drawing. What a buyer can hold a factory to without a drawing is the defect list: short shots, flash on the parting line, sink marks opposite ribs and bosses, visible weld lines, warpage that stops two halves closing, and color difference against the approved sample. These are checked on the first-off part and again during the run, and they matter twice on chrome models because plating makes a molding mark more visible rather than less. Where regrind is used and in what proportion is agreed per project. A signed color and appearance sample stays the reference for the run. ## What to specify in a molding RFQ Send the model or the reference photo, the quantity per color, the material if you have a preference, the color reference (a Pantone number or a physical sample), the finish, and the market the product ships to. If the product is your own design, add the 3D file and say which dimensions are functional and which are cosmetic. Ask the factory in return for: which existing tool is closest to your product, what would have to change, whether the change is an insert modification or a new mold, the sample lead time, and the production lead time at your quantity. On an existing tool the working guides are about 30 days of production; a new tool adds about 15 days of appearance design, 15 days of structure design and 60 days of mold making. ## FAQ ### Does ZHONGHE mold its own shower head parts? Yes. ABS bodies, face plates and handles and PC transparent parts are injection-molded on the factory's own 15 machines in Cixi, Ningbo, and the molds behind the 96 catalog model codes belong to the factory. ### Why are shower head bodies molded in ABS? ABS holds fine detail, keeps a hand shower light enough to hold for a whole shower, and takes chrome plating well, which is the finish most of the market expects. PC is used where a part has to be transparent and tough, such as a filter chamber or a clear handle. ### Can the factory mold a custom color? Yes. Colour comes from masterbatch mixed into the resin, so it runs through the whole part. Send a Pantone number or a physical sample; the approved color sample then stays the reference for the production run. ### How many parts are in one hand shower? Usually seven or more molded parts, plus components. A typical filter model has a face plate, a water chamber, two handle halves, a cartridge housing, a connection nut and button or selector parts, with O-rings, filter media and the hose supplied as components. ### Can we get molded parts without assembly? Ask in the RFQ. The factory's normal output is finished, water-tested and packed units, so a parts-only order is quoted case by case and depends on the model and the quantity. ## Related pages - https://www.ningboware.com/manufacturer/shower-head-mold-maker-and-tooling/ - https://www.ningboware.com/manufacturer/shower-head-plating-and-surface-finishing/ - https://www.ningboware.com/manufacturer/shower-head-assembly-and-water-testing-line/ - https://www.ningboware.com/design-manufacturing/ - https://www.ningboware.com/materials-finishes/ - https://www.ningboware.com/resources/shower-head-materials-guide/ - https://www.ningboware.com/shower-heads/abs-plastic-shower-heads/